What are the costs for aggregate concrete sidewalk installation in Thomson IL?

Home Remodeling & Home Services Cost Estimates

square feet

ITEM	QUANTITY	LOW	HIGH
Sidewalk Cost Non-discounted retail cost for common, mid-grade sidewalk. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles	215 square feet	$299.77	$331.49
Sidewalk Labor Direct labor expenses to install exposed aggregate sidewalk.	9.3 hours	$515.88	$540.27
Sidewalk Job Materials and Supplies Cost of supplies that may be required to install exposed aggregate sidewalk including: reinforcing materials, isolation materials, cleaning and chemical release agents .	200 square feet	$17.79	$24.25
Sidewalk Equipment Allowance Job related costs of specialty equipment used for job quality and efficiency, including: 48" bull float, reinforcing bar cutters, 5+ cubic foot mortar mixing box with mortar hoe.		$58.20	$103.31
Total Cost to Install Exposed Aggregate Sidewalks	215 square feet	$891.63	$999.31
	Average cost per square foot	$4.46	$5.00

This is an estimate. You can get an accurate quote for your project from a Thomson concrete and masonry pro.

Get a FREE Quote

Cost to Install Exposed Aggregate Sidewalks - 2025 Cost Calculator

To Install Exposed Aggregate Sidewalks in Thomson you should expect to pay in the range of $891.63 to $999.31. What we use to calculate Thomson Aggregate Concrete Sidewalk Installation estimates is average material costs, average hourly labor wages and labor productivity rates. To get a more accurate estimate on your Aggregate Concrete Sidewalk Installation in Thomson project:

1. Pick the Location of the Project
2. Tell us the size of your Project
3. Click the "Calculate" button

Average Cost per square foot for Aggregate Concrete Sidewalk Installation in Thomson

The average cost to Install Exposed Aggregate Sidewalks in Thomson 2025 is $4.46 to $5.00 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Thomson Aggregate Concrete Sidewalk Installation projects always make sure to receive project estimates from several contractors.

Cost Breakdown for Aggregate Concrete Sidewalk Installation in Thomson

Non-discounted retail costs for 215 square feet of Sidewalk Installation - between $299.77 and $331.49.
Direct labor costs to Install Exposed Aggregate Sidewalks in Thomson - between $515.88 and $540.27.
Cost of all materials and supplies which may be necessary for Aggregate Concrete Sidewalk Installation , which may include: - between $17.79 and $24.25.
Costs of specialty equipment used for efficiency and job quality, which may include: - between $58.20 and $103.31.

What the Thomson Sidewalk Installation Estimate Includes:

Costs associated with worksite preparation for the Aggregate Concrete Sidewalk Installation in Thomson project, which may include any costs for materials, components, protection of existing structures and finishes.
Costs for all local Thomson materials and equipment delivery to the work site.
Costs for junk/debris removal and job cleanup after project completion.
Hourly charges, labor setup and mobilization time that are usually associated with Aggregate Concrete Sidewalk Installation projects.

What the Sidewalk Installation Estimate Does Not Include:

Any fees for permits or inspection which may be required for the project by the Thomson building department.
Illinois and Thomson sales taxes on supplies and materials.
Any general contractor fees for supervision of the Thomson Aggregate Concrete Sidewalk Installation project. Please add 12% to 20% to the total cost shown above if you will be hiring a general contractor to supervise this project.